Hane®Module
Lightweight Solar Module
Overview
The Hane® Module is a module designed to be lightweight using our proprietary technology.
Because of its low weight, it can be installed on the roofs of factories, warehouses, and other facilities on which installation had been abandoned due to load-bearing issues.
Lineup
| Exterior | Monocrystalline 182 mm half-cut, 108 cells | Monocrystalline 182 mm half-cut, 108 cells | Monocrystalline 182 mm half-cut, 144 cells |
|---|---|---|---|
  |
  |
 |
|
| Model | TYM410HANE-AL-SHX | TYM410HANE-AL-SHX-S3 | TYM550HANE-AL-SHX |
| Maximum power | 410W | 410W | 550W |
| Module efficiency | 20.9% | 20.9% | 21.2% |
| Dimensions | 1722*1134*35mm | 1722*1134*35mm | 2278*1134*35mm |
| Weight | 16kg (8.2kg/㎡) | 18kg (9.2kg/㎡) | 22kg (8.5kg/㎡) |
| Test load | With rail = +5400 Pa/-3600 Pa Without rail = +3600 Pa/-3600 Pa |
With rail = +6750 Pa/-6000 Pa Without rail = +6750 Pa/-6000 Pa |
With rail = +5400 Pa/-2400 Pa Without rail = +3600 Pa/-2400 Pa |
| Exterior | Monocrystalline 182 mm half-cut, 108 cells | Monocrystalline 182 mm half-cut, 144 cells |
|---|---|---|
  |
 |
|
| Model | TYM410NORN-AL-HX | TYM550NORN-AL-HX |
| Maximum power | 410W | 550W |
| Module efficiency | 20.9% | 21.2% |
| Dimensions | 1722*1134*35mm | 2278*1134*35mm |
| Weight | 21.5kg (11.0kg/㎡) | 27kg (10.5kg/㎡) |
| Test load | With rail = +5400 Pa/-2400 Pa Without rail = +3600 Pa/-2400 Pa |
With rail = +5400 Pa/-2400 Pa Without rail = +3600 Pa/-2400 Pa |
| Exterior | Monocrystalline 182 mm half-cut, 108 cells | Monocrystalline 182 mm half-cut, 144 cells |
|---|---|---|
 |
|
|
| Model | TYM410GARN-AL-HX | TYM550GARN-AL-HX |
| Maximum power | 410W | 550W |
| Module efficiency | 20.9% | 21.2% |
| Dimensions | 1722*1134*30mm | 2278*1134*30mm |
| Weight | 25kg (12.8kg/㎡) | 32.5kg (12.6kg/㎡) |
| Test load | With rail = +5400 Pa/-2400 Pa Without rail = +2400 Pa/-2400 Pa |
With rail = +5400 Pa/-2400 Pa Without rail = +3600 Pa/-2400 Pa |
In addition to the above, we also have large-sized and high-power models. Please contact us for more information.
Overview
- ・Toyo Aluminium is one of the world’s oldest manufacturers of solar components, with more than 25 years of proven results with the Toyal Solar® backsheet for solar modules and ALSOLAR®, an electrode aluminum paste for the backside of solar cells.Leveraging this know-how, we used our proprietary technology to develop the Hane® Module, a lightweight solar module that is about two-thirds lighter than conventional solar modules. In addition to being lightweight, we placed emphasis on creating a module that is strong and powerful.
- ・Our general module uses 3.2 mm glass and a backseat, but the Hane® Module uses our company’s proprietary thin glass on the front and reinforcements such as a reinforcement bar on the back to ensure its strength.
10-Year Product Warranty + 20-Year Output Warranty
-
The Hane® Module comes with a 10-year product warranty and a 20-year output warranty so that you can use it with confidence.
- Product warranty: Applicable in the event of design, manufacturing, and other defects (mechanical malfunctions that affect the functionality of the product, such as deformation, damage, or rattling caused by defects in the manufacturing process or components) attributable to our company.
- Output warranty: Applicable in the event that the power of the solar module (Pmax [W]) falls below the lower limit of the maximum power by 90% within 10 years and by 80% within 20 years under the conditions specified in JIS C 8918.
Graph of guaranteed output
VDE Certified
-
Our company’s modules are certified by the VDE Testing and Certification Institute, a German certification agency, by conducting safety and reliability tests according to IEC international standards.
IEC 61215-1:2016 Design qualification and type approval (test requirements) IEC 61215-1-1:2016 Design qualification and type approval (special requirements for testing of crystalline silicon photovoltaic (PV) modules) IEC 61215-2:2016 Design qualification and type approval (test procedures) IEC 61730-1:2016 Safety qualification (requirements for construction) IEC 61730-2:2016 Safety qualification (requirements for testing) IEC 62804-1:2015 Test methods for the detection of potential-induced degradation (PID) IEC 61701:2011 Salt mist corrosion testing 
Hane® Module Mounts (Optional)
*The information listed below includes examples of mounts that our company can propose.
In addition to the mounts shown below, commercial mounts can also be used as long as they conform to the Hane® Module handling and installation instructions.
-
ENESTANDThis stylish cantilevered carport is equipped with the Hane® Module and takes advantage of its low weight.
[“ENESTAND” is a product of SkyJapan Co., Ltd.] -
Low-profile Mount for Flat RoofsThis lightweight mount can easily be installed on flat roofs without the need for anchoring, eliminating potential concerns about leaks caused by rain.
Despite using an adhesive-based installation method, it has the same Class-S earthquake resistance as systems that use anchoring, ensuring peace of mind even during typhoons and earthquakes.
[The Low-profile Mount is a product of ryowatechno service Co., Ltd.]
Installation Examples
-
Floating, Nara Prefecture
500.5 kW, September 2023 -
Flat roof, Hokkaido
(using low-profile mounts) 1248.75 kW, April 2023 -
Corrugated metal roof, Aichi Prefecture
687 kW, December 2022 -
Carport, Niigata Prefecture
45.4 kW, December 2021 -
Corrugated metal roof, Saitama Prefecture
518.2 kW, November 2021 -
Flat roof, Toyama Prefecture
84.7 kW, January 2021 -
Carport, Shizuoka Prefecture
(using ENESTAND mounts) 37.7 kW, December 2020 -
Carport, Iwate Prefecture
(using ENESTAND mounts) 8.3 kW, March 2020 -
Flat roof, Wakayama Prefecture
(using low-profile mounts) 110.0 kW, November 2019
