POWDER & PASTE PRODUCTS

The registered trademark symbol（® mark） means a registered trademark in Japan.

Metal coating conductive filler
“TOYAL TecFiller™ TFM Series”

Powder Products Electronic equipment

We have made it possible to evenly plate metal layer, such as gold or silver, onto particles of metals, inorganic matter, and organic matter.
Aluminium heat dissipating filler
“TOYAL TecFiller™ TFH Series”

Powder Products Electronic equipment

Because aluminium has high thermal conductivity of at least 200 W/mK, and also a smaller specific weight than other metals, it exhibits superior characteristics as a thermal conduction filler.
Aluminium nitride insulating thermal
conduction filler
“TOYAL TecFiller™ TFZ Series”

Powder Products Electronic equipment

Mixing this filler with resins, rubbers, and oils raises their heat dissipating properties.
Aluminium nitride powder
for sintering “TOYALNITE™”

Powder Products Industrial and construction materials Electronic equipment

Aluminium nitride is a unique material that provides both high heat dissipating properties and insulating properties
Aluminium alloy powder “POWDALLOY™”

Powder Products Industrial and construction materials Electronic equipment

These are rapid-quenched alloy powders with different metals added to aluminium.
Interference color aluminium
pigment "Cosmicolor®"

Powder Products Medicines and Chemical products

This is a completely new type of metallic pigment that has aluminium flakes as the base material. The surface of the flakes is covered with a silica layer and then they are plated with metal particles
Dummy balls

Powder Products Electronic equipment

These are used as a media that conducts electricity in the barrel plating of small products. They are mainly used in the plating of the electrodes on electronic components
Leafing ALPASTE®

Paste Products Industrial and construction materials

In this type of paste, surface tension causes the aluminium flakes to float to the surface of the coating and arrange in parallel. This makes is possible to achieve a gloss similar to that of chrome plating
Non-leafing ALPASTE®

Paste Products Food and daily essentials Industrial and construction materials

In this type of paste, the aluminium flakes are uniformly dispersed in the coating film. Coating films with a characteristic gloss are achieved because the aluminium flakes reflect light through the coating film. We can offer various glosses by controlling the particle size distribution and particle shape
High-gloss ALPASTE®

Paste Products Food and daily essentials Industrial and construction materials

High-gloss ALPASTE® products are aluminium pigments with good design properties that are coin shaped and have a smooth surface. They are used in applications such as the top coat for automobiles, plastic coatings and printing ink, especially in applications where a strong metallic design is favored
Resin coated ALPASTE®

Paste Products Food and daily essentials Industrial and construction materials

This is aluminium paste coated with an acrylic resin. It has excellent resistance to chemicals, adhesiveness and voltage resistance (FZ Series)
TD Series (for printing inks)

Paste Products Food and daily essentials Industrial and construction materials

The "TD Series (for printing inks)" has been prepared as a product that has the mineral spirit normally used in aluminium paste completely replaced with environmentally friendly solvents such as propyl acetate and ethyl acetate. There is no residual odor left on the printed matter and the series is suitable for food packaging
ALPASTE® for water-based coating

Paste Products Industrial and construction materials

As aluminium pastes for water-based coating, we offer the WXM Series and WL Series, which have excellent cost performance, and the Emeral Series (EMR), which has a silica coating for excellent gas suppression performance, so that there is almost no gas emission
Interference color aluminium
pigment "CHROMASHINE®"

Paste Products Food and daily essentials Medicines and Chemical products Electronic equipment

Using the interference of light, a completely new type of metalic pigment was developed which appears to be different colors depending upon which angle the object is viewed from. In addition to conventional uses in coatings and printing inks, it is opening up new design possibilities in various fields, including cosmetics (with Cosmicolor®).
Colored ALPASTE®
"FRIEND COLOR®"

Paste Products Food and daily essentials Industrial and construction materials

We are always searching for new shine for metalic coatings. The aluminium flakes in FRIEND COLOR® have color pigments attached and are then coated with resin. They realize vivid and dear metalic coatings.
Aluminium flakes for powder coating

Paste Products Industrial and construction materials

Our “PCF” series of metalic pigments has an acrylic resin coating on the aluminium paste. It is blended with powder coating resin powders and used widely as an environmentally friendly electrostatic powder coating.
Stainless steel flakes

Paste Products Industrial and construction materials

We utilize our flaking technologies to produce flakes of high quality stainless steel (SUS316L) to create highly functional pigments that are tough and highly resistant to chemicals
Brazing pastes

Paste Products Food and daily essentials Industrial and construction materials

This is an aluminium brazing paste that is clearly distinctive from conventional products. It was developed for the Nocolok® brazing method and has both the coating performance of ink and the convenience of brazing paste.
TOYALSHINE®

Paste Products Food and daily essentials Industrial and construction materials

These are very thin aluminium flakes produced by vacuum deposition. It can provide chrome plating tone.
METASHINE® PSTM Series

Paste Products Industrial and construction materials

These are glass flekes coated by Silver and Silica layer. It has clarity of grass and unique brilliance.
Metallic compounds "METAX®"

Paste Products Food and daily essentials Industrial and construction materials Electronic equipment

These are metallic materials for resin injection molding that achieve both a beautiful finish and cost reduction. The occurrence of weld lines during molding can be improved remarkably (METAX®). It is in use in a wide range of applications, including for engine covers and internal panels on automobiles, on domestic electrical appliances such as computers and in construction materials

* "Alpaste" is a registered trademark
of Toyo Aluminium K.K.

Return to Product Information